Assembly Mount, Adjusting
Risk of injury due to overloading the engine support.
Improper handling can lead to damage of the tool and to injury.
- Never loosen or remove the engine and transmission mount at the same time.
Engine Mount
-- Loosen the coolant expansion tank and move to the side. Refer to Coolant Expansion Tank, Removing and Installing .
-- Determine the dimension -a- and dimension -b- in between the engine mount -1- and the engine support -2-.
Condition
- The engine mount -1- and the engine support -2- must be parallel to each other. Refer to Check and Adjustment Values .
If the check and adjustment values are not reached:
-- Support the engine in the installation position. Refer to Engine, Supporting in Installation Position .
-- Remove the engine mount bolts -arrows-.
-- Screw in the bolts -arrows- by hand.
-- Align the engine mount. Refer to Check and Adjustment Values .
-- Tighten the bolts on the engine mount.
Transmission Mount
Engine Compartment Battery
-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
Continuation for all vehicles
Luggage Compartment Battery
-- Remove the air filter housing mount.
Continuation for all vehicles
-- Determine the dimensions -a-.
Condition
- The support arm edges and the transmission support must be parallel to each other. Refer to Check and Adjustment Values .
If the check and adjustment values are not reached:
-- Support the engine in the installation position. Refer to Engine, Supporting in Installation Position .
Vehicles with two transmission bolted connections
-- Remove the bolts -arrows-.
-- Screw in the bolts -arrows- by hand.
Continuation for all vehicles
Vehicles with three transmission bolted connections
-- Remove the bolts -arrows-.
-- Screw in the bolts -arrows- by hand.
Continuation for all vehicles
-- Align the transmission mount. Refer to Check and Adjustment Values .
-- Tighten the transmission mount bolts.
Tightening Specifications
- Refer to Overview - Assembly Mounts .