LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2024 >> GTI SE, Standard Trans >> Repair and Diagnosis >> Steering >> Steering Gear >> 48 Steering >> Steering Column >> Electronic Steering Column Lock Control Module -J764-, Removing And Installing, Version 2 >> Electronic Steering Column Lock Control Module J764, Removing And Installing >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Steering Column Lock Control Module J764, Removing And Installing: Removing

The Electronic Steering Column Lock Control Module -J764- will be called control module in the information that follows.

If the control module is replaced, the test plan to replace the control module must be performed.

-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the Steering Column Electronics Control Module -J527-. Refer to the appropriate service information .

-- Unclip the wire bracket -3- for the wire -2-.

GWWN48-10909Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -4- on the control module -5-.

-- Pry out the bracket -2- using a commercially available screwdriver.

GWWN48-10942Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Create a center notch on the shear bolts -3- using a commercially available metal saw.

-- Remove shear bolts -3-.

-- Remove the control module -4- from the steering column -1-.