LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2024 >> GTI Autobahn, Standard Trans >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Motor Systems >> Engine Assembly >> 10 Engine Assembly >> Assembly Mounts >> Engine Mount, Removing And Installing >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Mount, Removing And Installing: Removing

-- Loosen the coolant expansion tank and move to the side. Refer to Coolant Expansion Tank, Removing and Installing .

Vehicles with Brake System Vacuum Pump -V192-

-- Remove the Brake System Vacuum Pump -V192-. Refer to the appropriate service information .

Continuation for all vehicles

Vehicles with Activated Charcoal Filter Air Flushing Pump -V700-

-- Move the Activated Charcoal Filter Air Flushing Pump -V700- with connected lines to the side. Refer to the appropriate service information .

Continuation for all vehicles

-- Refer to Engine, Supporting in Installation Position  .

Vehicles with ground cable

-- Remove the nuts -1- and the ground cable -2-.

GWWN10-11258Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Continuation for all vehicles

Condition

-- Remove the bolts -arrows- and the engine mount -1-.

GWWN10-11013Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.