Control Module, Removing And Installing, All-Wheel Drive Clutch Generation V: Installing

Install in reverse order of removal.

• If a new control module is installed, a basic setting must be performed.

-- Connect the Vehicle Diagnostic Tester with the vehicle.

-- Switch the ignition on.

-- Touch the "Guided Functions  " field/button on the screen.

-- Select one after another on the tester:

• Brand
• Type
• Model year
• Variant
• Engine codes
• Confirm the entered data.
• 22 - AWD electronics
• 22 - Control module, replacing

-- Continue following the instructions in the Vehicle Diagnostic Tester.