Parking Aid / Parallel Parking Assistance Control Module, Removing And Installing: Notes

CAUTION:

If the control module is replaced, perform the adaptation using the Vehicle Diagnostic Tester.

Remove the Parking Aid Control Module -J446- /Parallel Parking Assistance Control Module -J791-. Refer to PARKING AID / PARALLEL PARKING ASSISTANCE CONTROL MODULE, REMOVING AND INSTALLING .

Installing. Refer to Installing .

Remove the bracket for the Parking Aid Control Module -J446- /Parallel Parking Assistance Control Module -J791-. Refer to PARKING AID / PARALLEL PARKING ASSISTANCE CONTROL MODULE, REMOVING AND INSTALLING .

Remove the Parking Aid Control Module - J446- / Parallel Parking Assistance Control Module - J791-

-- Remove the footwell cover on the driver side. Refer to DRIVER SIDE FOOTWELL COVER, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -2- and -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the retaining tab in the -direction of the arrow-.

-- Remove the control module -1- downward out of the bracket.