Overview - Selector Mechanism, After Product Improvement

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Trim
   • For center console insert
   • Removing and Installing. Refer to OVERVIEW - CENTER CONSOLE .
2. Controls for Shift Mechanism
   • Is removed together with the center console insert.
   • Removing and Installing. Refer to FRONT ASHTRAY, REMOVING AND INSTALLING .
3. Bracket
   • Clipped into the heater and A/C unit
4. Insulation Mat
5. Rear Center Console Bracket
   • Removing and installing. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
6. Nut
   • Quantity: 4
   • M6 - 8 Nm
7. Shift Mechanism
   • With selector cable
   • With emergency release mechanism. Refer to EMERGENCY RELEASE FROM P, AFTER PRODUCT IMPROVEMENT .
   • Removing and Installing. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
8. Bolt
   • Quantity: 2
   • 20 Nm
9. Shift Lever
10. Gearshift Shaft Seal
    • Replace after removing
    • Removing and Installing. Refer to SELECTOR SHAFT SEAL, REPLACING .
11. Nut
    • 15 Nm
12. Cable Retainer
    • Replacing when removing and during adjusting procedures
    • Removing and Installing. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
    • Adjusting. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING, AFTER PRODUCT IMPROVEMENT .