Lane Change Assistance Control Module -J769- / -J770-, Removing And Installing: Removing

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the bolt -5- for the bracket -3-

-- Release the retaining tab -4- on the bracket -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770- -1- in -direction of the arrow- from the bracket -3-, until the connector -6- is accessible.

-- Release and disconnect the connector -6-.

-- Remove the nuts -2- for the bracket -3-

-- Remove the bracket -3- from the body.