Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING: Installing
Install in reverse order of removal.
Battery for Control Module for Emergency Call Module and Communication Unit -J949-, Removing and Installing
Removing
Damage to the emergency call module control module
- Shut down the emergency call module control module using the Vehicle Diagnostic Tester.
-- "0075 - Emergency battery, replacing" function Vehicle Diagnostic Tester.
-- Remove the emergency call module control module. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .
-- Remove the bolt -arrow- and remove the battery tray cover -1-.
-- Release and disconnect the connector -arrow-.
-- Remove the emergency call module control module battery -1-.
Installing
Installation is performed in reverse order of removal, noting the following:
| Component | Tightening Specification |
|---|---|
| Battery Tray Cover Bolt | 1.5 Nm |