Special Tools

Special tools and workshop equipment required 

• Torque Wrench 1332 40-200Nm: VAG1332 
• Puller - Inner Output Shaft Seal: T10397 
• Puller - Outer Output Shaft Seal: T10398 
• Seal Installer - Inner Output Shaft: T10399 
• Seal Installer - Outer Output Shaft: T10400 

Special tools and workshop equipment required 

• Holding Fixture: VW313 
• Press Piece - 42mm: VW516 
• Press Piece - Multiple Use: 40-105 
• Seal Installer - Flange Shaft: T10049 
• Gearbox Support: T10108 
• Gearbox Support - Stop Plate: T10108/1 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Torque Wrench 1601: VAG1601 
• Two-Arm Puller: VAS251001  , or for example Two-Arm Puller: 20/10 
• Three-Arm Puller: VAS251205 
• Slide Hammer Set: VW771 
• Slide Hammer Set - Hook: VW771/37 
• Seal Grease
• Universal Grease
• Refer to the Parts Information for the grease allocation.
• Two M10 x 30 bolts
• Four M12 x 10 nuts

Special tools and workshop equipment required 

• Press Plate: VW401 
• Press Plate: VW402 
• Press Piece - Rod: VW407 
• Press Piece - Multiple Use: VW412 
• Rear Wheel Bearing Kit - Piece 5: 3253/5 
• Bearing Installer - Needle Bearing: T10047 

Special tools and workshop equipment required 

• Torque Wrench 1331 5-50Nm: VAG1331 
• Bearing Installer - Pinion Bearing: VW470 
• Socket And Extended Bit: T10107A 
• Thrust Piece: T40023 
• -3- Separating Tool 22 to 75 mm, such as : 17/1 

Special tools and workshop equipment required 

• Puller - Unit Injector: T10055 
  Fig 5: Identifying Puller T10055

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Seal Installer - Flange Shaft: T10105 
  Fig 6: Identifying Thrust Piece -T10105-

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Seal Installer - Drive Flange: T10143 

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Seal Installer - Flange Shaft Oil Seal LH: T10176 
  Fig 7: Identifying Thrust Piece T10176

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Seal Installer - Stub Shaft: T10379 

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Seal Installer - Hollow Shaft: T10380 
  Fig 8: Identifying Thrust Piece - T10380-

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller - Crankshaft/Power Steering Seal: T20143 
  Fig 9: Crankshaft / Power Steering Seal Puller

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Shop Crane - Drip Tray: VAS6208  or
  Fig 10: Identifying Drip Tray

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Drip Tray for VAG1202A: VAG1306 
• Used Oil Collection and Extraction Unit: SMN372500 
  Fig 11: Identifying Used Oil Collection And Extraction Unit

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Charging Device For BorgWarner Coupling 2: VAS6291A 
  Fig 12: Identifying Charging Device For Haldex Coupling 2 VAS6291A

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Charging Device For BorgWarner Coupling 2 - Adapter 2: VAS6291/2 
  Fig 13: Device For Haldex Coupling 2 - Adapter 2VAS6291/2

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller - Grease Cap: VW637/2 
  Fig 14: Identifying Puller - Grease Cap VW637/2

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Not Illustrated:
• Puller - Unit Injector - Adapter 2: T10055/2 
• Commercially available drill
• Commercially available metal drill bit, 2 to 4 mm
• Seal Grease: G 052 128 A1