Right Seal On Bevel Box, Replacing: Notes
Special tools and workshop equipment required
- Puller - Crankshaft/Power Steering Seal: T20143
- Seal Installer - Drive Flange: T10143
- Puller - Grease Cap: VW637/2
- Drip Tray: VAG1306
- or Shop Crane - Drip Tray: VAS6208
- Seal Grease
- Lubricating Grease for Clutch Plate Splines
- Refer to the Parts Information for the grease allocation.
NOTE:
The seal can be replaced with the bevel box still installed.