Left Seals Between Bevel Box And Transmission On Bevel Box, Replacing: Installing

Installing the >>outer<< Seal.

Fig 1: Identifying Oil Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Fill the space with the new seal between the sealing/dust lip -arrow- halfway with Seal Grease: G 052 128 A1 .

-- Lightly oil the new seal on the outer edge.

-- Install the seal all the way.

Fig 2: Identifying Installation Of Seal Using Thrust Piece -T10380-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing the >>inner<< Seal.

Fig 3: Identifying Oil Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Fill the space with the new seal between the sealing/dust lip -arrow- halfway with Seal Grease: G 052 128 A1 .

-- Lightly oil the new seal on the outer edge.

-- Install the seal all the way.

Fig 4: Installing Seal With Special Tool T10379

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully drive the stub shaft in as far as the stop using a plastic hammer.

-- Install a new circlip -1- on the stub shaft.

Fig 5: Identifying Circlip And Flange Shaft

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bevel box. Refer to BEVEL BOX, INSTALLING .

-- Check the gear oil in the bevel box. Refer to GEAR OIL, CHECKING LEVEL .