Electronic Steering Column Lock Control Module -J764-, REMOVING AND INSTALLING: Installing
Install in reverse order of removal. Note the following:
-- Secure the Electronic Steering Column Lock Control Module - J764- -1- to the mounting plate -2- with new shear bolts -arrows-.
-- Tighten the shear bolts -arrows- evenly until the bolt heads shear off.
-- If the Electronic Steering Column Lock Control Module - J764- was replaced, it must be adapted by selecting the "Replace" function on the Vehicle Diagnostic Tester in the "Guided Function".
-- Perform a basic setting on the Steering Angle Sensor -G85- using the Vehicle Diagnostic Tester.