Shorten the Bleed Pipe on the as Follows:

Fig 1: Identifying Shortening Pipe On Adapter For Oil Filling VAS 6262 A

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Shorten the pipe to dimension -a- so that the bleed pipe on the :VAS6262A  will not touch the bottom on some fluid containers.

Dimension -a- = 210 mm

-- Shorten the bleed pipe with the :VAS6056/2  , for example.

Fig 2: Cutting Pipe

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Requirements

• The vehicle is level and all hoist mounts are the same height.
• Noise insulation removed.
• The Vehicle Diagnostic Tester is connected.
• To begin working, the oil temperature should not be higher than 45 °C (113 °F).
• Test temperature: 35 to 45 °C (95 to 113 °F)