Engine And Transmission, Separating, Vehicles With DSG Transmission
Special tools and workshop equipment required
- Engine Support Bridge - Special Hook (2 pc.): 10 - 222 A /20
- Engine Sling - Engine Bracket: 2024A/1 from the Engine Sling: 2024 A
- Shop Crane: VAS 6100
- Engine Bung Set: VAS 6122
If the engine and transmission are separated, the needle bearing on the crankshaft must be replaced. Refer to the appropriate Service Information .
Procedure
- Engine/transmission assembly removed and secured on the Engine Support: T10497 .
Remove the charge air pipe from the engine.
-- Remove the nut -arrows- and remove the front bracket from the transmission fluid pan.
The threaded bolts are welded to the front of the oil pan.
-- Remove the bolts -1 and 2- and remove the bracket from the bevel box.
-- Open the hose clamps -arrows- and remove the coolant hoses from the transmission fluid cooler.
Place a cleaning cloth underneath to catch any coolant leaking out.
-- Remove the starter. Refer to STARTER, REMOVING AND INSTALLING .
-- Engage the hook from the Engine Sling: 2024 A on the transmission lifting eye and secure it with the retainer -arrow-.
-- Use the Engine Support Bridge - Special Hook: 10 - 222 A /20 to engage the Shop Crane: VAS 6100 on the Engine Sling - Engine Bracket : 2024 A /1 .
-- Remove the bolts -1 to 8- for the transmission/engine connection.
Ignore -item A-.
-- Remove the transmission from the engine.