Front Flexible Disc, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Install all parts marked to each other in their original positions.
• Replace the bolts that were tightened with an additional turn.
• Gaskets in driveshaft flanges -1- must not be damaged when removing and installing.

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the flexible disc to the driveshaft using new bolts.

Flexible Disc and Heat Shield Installation Position:

• The open side of the shield faces away from the driveshaft.
• Install the flexible disc so that the shield touches the driveshaft flange

-- Install the driveshaft. Refer to DRIVESHAFT, REMOVING AND INSTALLING .