Engine, Securing To Engine And Transmission Holder

Fig 1: Identifying Special Tools - Engine, Securing To Assembly Stand

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Procedure

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Engage the Engine Sling: 2024 A onto the engine and onto the Shop Crane: VAS 6100 .

Fig 2: Engine Lifted

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To be aligned to the center of gravity of the engine assembly, the hole rails must be inserted as shown.

-- Secure the mounting hooks and pins on the engine support bridge using securing pins -arrows-.

-- Lower the engine from the Engine and Gearbox Jack: VAS 6931 using the Shop Crane: VAS 6100 .

-- Remove the transmission alignment sleeves and fasten the transmission side of the engine on the Engine and Transmission Holder: VAS 6095A .

Fig 3: Identifying Engine And Transmission Holder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.