Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770-, Removing And Installing: Removing

-- Turn off all electrical equipment.

-- Switch off the ignition.

-- Place the vehicle key outside of the passenger compartment.

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release and disconnect the connector -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the hook -2-.

-- Pivot the control module -item 1- in the direction of the -arrow- out of the holder and then remove.

-- In order to remove the control module bracket -item 1-, remove the nut and the bracket.