Overview - Door Components
NOTE:
The illustration shows the left side. The right side is identical.
- Window Guide
- Removing and Installing. Refer to WINDOW GUIDE, REMOVING AND INSTALLING .
- Door
- Removing and Installing. Refer to DOOR, REMOVING AND INSTALLING .
- Adjusting. Refer to DOOR, ADJUSTING .
- Sticker
- Quantity: 4
- Use commercially available cloth tape if needed, diameter 40 mm.
- The sticker must completely cover the openings.
- Attach the sticker crease free.
- Plug
- Quantity: 2
- Insulation
- Self-adhesive
- Cut to size if necessary, 200 mm x 100 mm and 250 mm x 160 mm.
- Position as shown in the image. Distance 10 mm to the next damper.
- Warm up using the Wiring Harness Repair Set - Hot Air Blower :VAS1978/14A and then press onto the outer door panel.
- Outer Door Seal
- Removing and Installing. Refer to OUTER DOOR SEAL, REMOVING AND INSTALLING .
- Door Inner Cover
- Removing and Installing. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
- Always replace .
- Inner Window Shaft Strip
- Removing and Installing. Refer to INNER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
- Outer Window Shaft Strip
- Removing and Installing. Refer to OUTER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .