Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the Control Unit for Active Oil Separation -J1240-. Refer to Control Unit for Active Oil Separation -J1240-, REMOVING AND INSTALLING .

-- Release and remove the connector -4- from the Engine Speed Sensor -G28- -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the plugs -3- on the cylinder block and guide it on the Engine Speed Sensor -G28- -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Engine Speed Sensor -G28- -1-.