LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2023 >> Taos SEL >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Assembly 1.5L >> 10 Engine Assembly >> Assembly Mounts >> Transmission Mount, Removing And Installing >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Mount, Removing And Installing: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING .

Remove the engine control module. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the bracket -1-.

GWWA34-11052Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Depending on the version different brackets are installed.

-- Unclip the wiring guide -1- upward in direction of -arrows- and move it slightly to the side.

Fig 1: Identifying Wiring Guide
GWWA34-10923Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

-- Remove the bolts -2-, then the bolts -arrows- and remove the transmission mount -1-.

GWWM10-10093Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.