Transmission Mount, Removing And Installing: Removing
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
Remove the engine control module. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the bracket -1-.
NOTE:
Depending on the version different brackets are installed.
-- Unclip the wiring guide -1- upward in direction of -arrows- and move it slightly to the side.
-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .
-- Remove the bolts -2-, then the bolts -arrows- and remove the transmission mount -1-.