Driveshaft, Removing And Installing: Notes

Special tools and workshop equipment required 

• Counterhold - Kit - Multiple Use: T10172 
  Fig 1: Counterhold - Kit - Multiple Use T10172

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Engine and Gearbox Jack: VAS6931  or : V.A.G 1383 A 
  Fig 2: Engine and Gearbox Jack VAS6931 or VAG1383A

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Engine Support: T50015A 

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Engine Support Device - Gearbox Bracket: T10346/1 

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Label the position of all the parts to each other before removing them. Install in the same position otherwise there will be too much imbalance and could cause damage to the bearings and rumbling noises.
• Do not bend the driveshaft, only store and move when fully extended.
• Never let the driveshaft "just hang" during removal. Always support it.
• Always remove or install the driveshaft horizontally with respect to the drive flange.