OVERVIEW - EVAP SYSTEM, WITH Fuel Tank Leak Detection Module -GX36- AND Tank Switch-Off Valve -N288-

Fig 1: Exploded View Of EVAP System, With Fuel Tank Leak Detection Module -Gx36- And Tank Switch-Off Valve -N288-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Clip
2. Air Filter
   • Component location: at the right rear in the wheel housing under the wheel housing liner
   • Installed at the right longitudinal member
   • Removing and Installing. Refer to EVAP SYSTEM AIR FILTER, REMOVING AND INSTALLING .
3. Clip
   • With hose bracket
4. Bracket
   • For the air filter
5. Connecting Hose
   • From the air filter to the Fuel Tank Leak Detection Module -GX36-.
   • Check for debris and clean if necessary.
6. Fuel Tank Leak Detection Module -GX36-
   • Component location: right rear at the EVAP canister
   • Removing and Installing. Refer to LEAK DETECTION PUMP, REMOVING AND INSTALLING .
7. Hose Clamp
8. Bracket
   • for Tank Switch-Off Valve -N288- and Fuel Tank Leak Detection Module -GX36-
9. Tank Switch-Off Valve -N288-
   • With Fuel Tank Pressure Sensor -G400-
   • Component location: right rear
   • Removing and Installing. Refer to Tank Switch-Off Valve -N288- WITH Fuel Tank Pressure Sensor -G400-, REMOVING AND INSTALLING .
10. Nut
    • 8.0 Nm
    • Quantity: 2
11. Bolt
    • 1.5 Nm
    • Quantity: 2
12. Connecting Hose
    • From Tank Switch-Off Valve -N288- to the EVAP canister
    • Check for debris and clean if necessary.
13. Wiring Harness
14. Bolt
    • 2.0 Nm
    • Quantity: 3
15. EVAP Canister
    • Component location: right rear
    • Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING, WITH Fuel Tank Leak Detection Module -GX36- AND Tank Switch-Off Valve -N288- .
16. Bolt
    • 20 Nm
    • Replace after removing
17. Hose Clamp
18. Connecting Hose
    • From the EVAP canister to the Fuel Tank Leak Detection Module -GX36-.
    • Check for debris and clean if necessary.
19. Nut
    • 8 Nm
    • Replace after removing