LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2023 >> Taos S, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> 87 Air Conditioning >> A/C Compressor >> Overview - Belt Pulley >> Overview - Belt Pulley, DENSO A/C Compressor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overview - Belt Pulley, DENSO A/C Compressor

Fig 1: Exploded View Of - Denso A/C Compressor Belt Pulley
GWWA87-11379Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Bolt
    • 4.5 Nm
    • Quantity: 3
  2. Cap
  3. Nut
    • 25 Nm

      -- Hold the belt pulley securely with a commercially available oil filter band wrench to loosen and tighten the hex nut.

  4. Drive Plate
    • The overload protection activates when the torque is too high (for example, if the A/C compressor runs with resistance) and the belt pulley runs freely without driving the A/C compressor.
  5. Circlip
    • Replace after removing
    • Install on the proper side - the flat side faces the A/C compressor
  6. Belt Pulley
    • There are different versions. Refer to the Parts Information.
    • Is sensitive to impact, be careful when handling
    • Removing and Installing. Refer to BELT PULLEY, REMOVING AND INSTALLING .
  7. A/C Compressor
    • Clean the A/C compressor input shaft before installing the belt pulley
scientia non olet · About LEMON Manuals