Rain/Light Recognition Sensor, Servicing, VALEO

-- Remove the Rain/Light Recognition Sensor -G397-. Refer to RAIN/LIGHT RECOGNITION SENSOR, REMOVING AND INSTALLING .

-- Carefully remove the sensor film -2- or remaining sensor film carefully from the Rain/Light Recognition Sensor -G397- -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

The surface on the sensor must be completely free of any remaining film.

-- Clean the sensor surfaces with cleaning solution D 009 401 04.

-- Remove the silicone paper -1- from the connecting pad -3-.

Fig 1: Identifying Protective Film

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- The clear protective film -2- remains on the connecting pad as an assembly aid.

-- Place the connecting pad -2- centered on the Rain/Light Recognition Sensor -G397- -3- using the transparent protective film -1-.

Fig 2: Identifying Protective Film

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the connecting pad -2- through the protective film -1- free of bubbles on the Rain/Light Recognition Sensor -G397- -3-.

-- Remove the protective film -2- from the connecting pad -1-.

Fig 3: Identifying Silicone Pad

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the Rain/Light Recognition Sensor -G397-. Refer to RAIN/LIGHT RECOGNITION SENSOR, REMOVING AND INSTALLING .