Rain/Light Recognition Sensor, Removing And Installing: Removing
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent switching on the ignition unintentionally.
-- Remove the interior rearview mirror. Refer to INTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .
After loosening the retainer, wait at least one minute. This allows the silicone layer to release tension and is not damaged while removing.
-- Release the left and right retainer -arrows-.
-- Starting at the top, carefully pry the Rain/Light Recognition Sensor -G397- -1- out of the frame on the windshield.
-- Release and disconnect the connector -1-.
-- Remove the Rain/Light Recognition Sensor -G397- -2-.
Until it is reinstalled, store the removed Rain/Light Recognition Sensor -G397- so that the connecting pad is not contaminated with dust or other deposits.