Rain/Light Recognition Sensor, Removing And Installing: Notes
CAUTION:
- The rain/light recognition sensor has a silicone layer (connecting pad) as a contact surface to the windshield.
- The rain/light recognition sensor is designed so that it can be used again. The only requirement to use it again is that the connecting pad must not be damaged or dirty (check the connecting pad).
- If a Rain/Light Recognition Sensor -G397- is replaced with a Rain/Light Recognition Sensor -G397- with a different part number, the new Rain/Light Recognition Sensor -G397- must be coded using the.
- The Rain/Light Recognition Sensor -G397- cannot be optionally installed. For the correct Rain/Light Recognition Sensor -G397-. Refer to the Electronic Parts Information (ETKA).