OVERVIEW - EVAP SYSTEM, WITH Fuel Tank Leak Detection Module -GX36-, VERSION 2

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Bolt
   • 20 Nm
   • Replace after removing
2. EVAP Canister
   • Component location: right rear
   • Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING, WITH Fuel Tank Leak Detection Module -GX36-, VERSION 2 .
3. Air Filter
   • Component location: at the right rear in the wheel housing under the wheel housing liner
   • Clipped in on the EVAP canister -item 2-
   • Removing and Installing. Refer to EVAP CANISTER AIR FILTER, REMOVING AND INSTALLING, VERSION 2 .
4. Hose Clamps
5. Connecting Hose
   • From the air filter to the Fuel Tank Leak Detection Module -GX36-.
   • Check for debris and clean if necessary.
6. Fuel Tank Leak Detection Module -GX36-
   • Component location: right rear at the EVAP canister
   • Removing and Installing. Refer to LEAK DETECTION PUMP, REMOVING AND INSTALLING, VERSION 2 .
7. Grommet
8. Bolt
   • 1.5 Nm
   • Quantity: 3
9. Bleeder Line
   • From the fuel tank
   • Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
10. Bleeder Line
    • To the EVAP Canister Purge Regulator Valve 1 -N80-
    • Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
    • Clipped to the underbody