April 5, 2026: LEMON Manuals is launched! Read the announcement.

Footwell Vent Temperature Sensor -G192-, REMOVING AND INSTALLING: Removing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the driver side footwell vent. Refer to DRIVER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

NOTE:

When levering using the Trim Removal Wedge: 3409 both locking tabs are pressed together -arrows-.

-- Pry out the Footwell Vent Temperature Sensor -G192- -2- using the Trim Removal Wedge: 3409 from the evaporator housing.