12V Battery, Checking Battery Terminal Clamp For Secure Fit

Special tools and workshop equipment required

Torque Wrench 1331 5-50Nm: V.A.G 1331

Fig 1: Identifying Torque Wrench
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Tight battery terminal clamps assure trouble-free battery function and long service life.

Make sure the terminal clamp is attached completely to the battery terminal.

CAUTION:

The battery clamp on positive terminal is not seated securely.

Short circuit or sparks possible.

- Always disconnect the battery ground cable from the battery negative terminal first.

-- Check the battery bracket -1- for a secure fit.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If necessary, retighten the bracket bolt -2- to the tightening specification.

-- Open or remove the battery positive terminal cover -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If equipped, open or remove the battery negative terminal cover -4-.

-- Check the battery terminal clamps -1- and -5- for a secure fit. If necessary, tighten the nuts -2- and -6-.

-- Close or attach the battery terminal covers -3- and -4-.

Tightening Specification	Nm
Nut on battery terminal	6
Bolt to bracket	15

After connecting the battery, perform the following:

Procedure