Battery, Removing And Installing: Removing
-- Turn off the ignition and all electrical equipment.
-- Remove the ignition key, if equipped.
-- Open the heat shield boot cover.
-- Open the cover -4- over the battery negative terminal.
-- Loosen the nut -6- several turns and disconnect the battery ground cable terminal clamp -5- from the battery negative terminal.
-- Open the cover -3- over the battery positive terminal.
-- Loosen the nut -2- several turns and remove the battery positive cable terminal -1- from the battery positive terminal.
-- Pull the heat shield boot -4- slightly upward.
-- Remove the bolt -2- from the bracket -1-.
-- Remove the bracket -1-.
-- Remove the Battery -A- -3- in the direction of travel from the battery tray and lift it upward out of the engine compartment.