Left Front Speaker -R2- /Right Front Speaker -R3-, REMOVING AND INSTALLING: Removing
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
-- Remove the left front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Release the connector locking mechanism on the Left Front Speaker -R2- in the direction of the -arrow-.
-- Remove the connector -1-.
-- Remove the rivets -1- with the Drill - 1100 Watt: VAS 6267A and a suitable spiral bit.
-- Remove the Left Front Speaker -R2- from the inner door panel.
CAUTION:
Always remove any shavings resulting from the drilling from the door, otherwise they may cause corrosion damage later.
If the paint on the door frame gets damaged during drilling, touch-up immediately.