Heat Pump Valve Unit, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

-- Install the seals and loss protection devices without oil.

If several components of the heat pump valve unit were replaced simultaneously:

-- Perform the adaptation of the refrigerant oil quantity in the refrigerant circuit. Refer to the appropriate Service Information .

Continuation

-- Perform the "open the electric activated valves for the refrigerant circuit for extracting, evacuating and filling" with Vehicle Diagnostic Tester . Refer to Diagnostic Entries .

-- Refer to the appropriate Service Information .

-- Refer to COOLING SYSTEM, FILLING .