Overview - Windshield Wiper System
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
The overview is described as an example for a LHD vehicle
- Front Passenger Side Wiper Blade
- Refer to Wiper Blade, Removing and Installing .
- Front Passenger Side Windshield Wiper Arm
- Refer to Windshield Wiper Arms, Removing and Installing .
- Refer to Windshield Wiper Arms, Adjusting .
- Driver Side Wiper Blade
- Refer to Wiper Blade, Removing and Installing .
- Driver Side Windshield Wiper Arm
- Refer to Windshield Wiper Arms, Removing and Installing .
- Refer to Windshield Wiper Arms, Adjusting .
- Cap
- Quantity: 2
- Nut
- 20 Nm
- Quantity: 2
- Bolt
- Tightening specifications and sequence Refer to Fig 2
- Quantity: 3
- Bolt
- 8 Nm
- Quantity: 2
- Securing Bracket
- Bolt
- 20 Nm
- Wiper Motor Control Module -J400-
- With Windshield Wiper Motor -V-
- With Windshield Wiper Stop Switch -F229-
- Refer to Windshield Wiper Motor V, Removing and Installing .
Windshield Wiper Motor - Tightening Specification and Sequence
| Step | Component | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -1, 2 and 3- | Install all the way by hand |
| 2. | -1, 2 and 3- | 8 Nm |