Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

If the vehicle electrical system control module is replaced, the test plan for replacing the vehicle electrical system control module must be performed.

-- Perform the "vehicle electrical system control module, replacing" function using the Vehicle Diagnostic Tester. Refer to DIAGNOSTIC ENTRIES .

Continuation

-- Remove the footwell cover on the driver side. Refer to DRIVER SIDE FOOTWELL COVER, REMOVING AND INSTALLING .

-- Disconnect the connectors -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the springs -3- in the direction of -arrow A-.

-- Pivot out the vehicle electrical system control module -1- from the bracket -4-.