Fender, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

If the A-pillar was replaced

-- Insert the pop rivet nuts -1-. Refer to the Parts Information.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Continuation for all vehicles

-- Wax the threaded connection to the side sill -1-. Refer to SEALING AND CORROSION PROTECTION .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Align the fender without tension.

-- Check the body gap dimensions using the Gauge - Gap Adjustment:3371 . Note the BODY FRONT when doing this.