Rear Body Underbody Protection
NOTE:
The underbody protection (stone chip protection) is to be repaired according to its original conditions in appearance and layer thickness.
Water drain holes must stay clear.
All threaded pins, weld nuts with M-threads, and all other pins and contact surfaces for the assembly must be functional after applying the underbody protection.
Rear Body Detailed View
- Underbody Protection
- Layer Thickness 0.3 mm
- Underbody Protection
- Layer Thickness 0.5 mm
Rear body underbody protection, FWD
- Underbody Protection
- Layer Thickness 0.3 mm
- Underbody Protection
- Layer Thickness 0.5 mm
Rear body underbody sealant, 4motion
- Underbody Protection
- Layer Thickness 0.3 mm
- Underbody Protection
- Layer Thickness 0.5 mm
Underbody protection on the rear body, additionally on hybrid vehicles
- Underbody Protection
- Layer Thickness 0.3 mm
- Underbody Protection
- Layer Thickness 0.5 mm