Front Axle Differential Lock, Securing To Engine And Transmission Holder

Special tools and workshop equipment required 

• Holding Fixture: VW 313 
  Fig 1: Identifying Holding Fixture

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Gearbox Support: T10108 
  Fig 2: Identifying Gearbox Support

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Mount the bevel box or front axle differential lock on the hole marked with the number -4- -arrow- in the Gearbox Support: T10108  .

Fig 3: Identifying Bevel Box Set On Hole Designated With Number 4 In Gearbox Support T10108

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -  Insert the M12 x 10 nut (quantity: 4) between bevel box and Transmission Holder.

-- Then align bevel box or front axle differential lock to the remaining 3 holes and secure.