Rear Lid Seam Sealing

Rear Lid Interior View

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-
Fine Seam Sealing
- For fine seam sealing, the sealing compound must project at least 3 mm and a height of 2 mm must be ensured.
-
Spreading the Seal
- The designated areas must be coated after the sealant is applied.

NOTE:

Make sure that the protected areas do not become uncovered when spreading the seal seam. A PVC layer that is thick enough must cover the panel.

Rear Lid Exterior View

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-
Fine Seam Sealing
- For fine seam sealing, the sealing compound must project at least 3 mm and a height of 2 mm must be ensured.
-
Smoothing / Spreading the Seal
- The designated areas must be evened out / smoothened out after the sealant is applied.

NOTE:

Make sure the protected areas do not become uncovered when smoothing/spreading the seam seal. A PVC layer that is thick enough must cover the panel.