Measurement Preparations, Axle Alignment Without Driver Assistance Systems

Special tools and workshop equipment required 

• Wheel Alignment Computer :VAG1813F 
  Fig 1: Identifying Wheel Alignment Computer V.A.G 1813

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Brake Pedal Actuator :VAG1869/2  .
  Fig 2: Identifying Brake Pedal Actuator

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Insert Tool - 18mm :T10179 
  Fig 3: Insert Tool - 18mm

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Shock Absorber Set :T10001 
  Fig 4: 18 mm socket from the Shock Absorber Set

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The lateral run-out of the rims must be balanced. Otherwise, the measurements will be false

A correct toe-in adjustment will not be possible without performing lateral run-out compensation!

Follow the operating instructions provided by the manufacturer of the alignment equipment.

-- Perform the wheel run-out compensation.

-- Insert the Brake Pedal Actuator :VAG1869/2  .

-- Actuate the brake pedal using brake pedal actuator.

Preparation Work for Calibrating Driver Assistance Systems