Overview - Instrument Panel CROSSMEMBER
- Securing Bracket
- Welded to the body
- Threaded Pin
- Quantity: 2
- 20 Nm
- Bolt
- 20 Nm
- Crossmember
- For the instrument panel
- Removing and Installing. Refer to INSTRUMENT PANEL CROSSMEMBER, REMOVING AND INSTALLING .
- Nut
- Quantity: 2
- 20 Nm
- Bolt
- Quantity: 3
- 4 Nm
- If a bolt is turned too far when installing the heater and A/C unit. Refer to Parts Information for allocation.
- Bolt
- Quantity: 2
- 20 Nm
- Bolt
- 20 Nm
- Crash Bolster
- Allocation. Refer to the Parts Information.
- Removing and Installing. Refer to CRASH BOLSTER, REMOVING AND INSTALLING .
- Bolt
- Only driver side
- 20 Nm