Transmission Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Transmission Tightening Specifications

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Item	Bolt	Quantity	Nm
1	M12 x 55 The cable bracket from the selector mechanism is placed on the pin of the bolt	1	80
2	M12 x 55 With a short M8 threaded pin, or M12 x 50 Without threaded pin	1	80
3	M12 x 170 With an M8 threaded pin Also starter to transmission	2	80
4	M10 x 105	1	40
5	M10 x 50	2	40
6	M12 x 70 or M12 x 65	1	80

Item -A- alignment sleeves for centering

Transmission with threaded insert (for example Heli Coil) for attaching the pendulum support

Fig 2: Identifying First Thread

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

There are threaded inserts (for example "Heli Coil") in the pendulum support fastening holes.

Identifying feature: there is a collar on the first thread -arrow-.

Please pay attention to the corresponding bolts and the tightening specification. Refer to Front Suspension or [For engine(s) DRNA] Engine Assembly .