Connection Diagram - EVAP System, From 10/2018
- Engine
- EVAP Canister Purge Regulator Valve 1 -N80-
- Check using the Vehicle Diagnostic Tester .
- Bleeder Line
- From the EVAP canister to engine
- Cap
- Seal must not be dirty or damaged
- Air Filter
- Leak Detection Pump
- Removing and Installing. Refer to LEAK DETECTION PUMP, REMOVING AND INSTALLING, FROM 10/2018 .
- EVAP Canister
- Component location: under the wheel housing liner in the right rear wheel housing
- Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING, FROM 10/2018 .
- Fuel Tank
- Overview. Refer to OVERVIEW - FUEL TANK .
- Removing and Installing. Refer to FUEL TANK, REMOVING AND INSTALLING .