Windshield, Removing And Installing: Installing
As an original part, the windshield is delivered with the seal.
On vehicles without a panorama sliding sunroof the seal must be removed and the seal -1- installed.
On vehicles with a panorama sliding sunroof the seal -4- remains installed.
-- Remove the seal -4-.
-- Apply the spacer -1- on the edge of the windshield.
-- On vehicles with Driver Assistance Systems Front Camera -R242-., install the front camera and calibrate. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN CENTER SECTION OF VEHICLE .
-- Prepare the undamaged window for glazing. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .
-- Prepare the new window glass for glazing. Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .
-- Prepare the body flange for glazing. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .
-- Follow the installation instructions. Refer to INSTALLATION INSTRUCTIONS FOR BONDED WINDOWS .
-- Minimum Curing Time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .