Engine, Securing To Engine And Transmission Holder
Special tools and workshop equipment required
- Lifting Support :2024B
- Engine and Gearbox Bracket VAS6095A :VAS6095A
- Shop Crane :VAS6100
There is a risk of injury from the lifted engine/motor falling.
The possibility for parts of the body to be pinched or crushed increases.
- Secure the mounting hooks and pins on the lifting tackle with a securing pin.
Requirement
- The Lifting Support :2024B must be used for gasoline engines.
- The Lifting Tackle :3033 must be used for diesel engines.
-- Refer to Engine and Transmission, Separating .
Vehicles with Intermediate Plate
-- Remove the intermediate plate. Refer to Intermediate plate, removing and installing .
Vehicles with 1.0L Gasoline Engine
-- Balance the center of gravity of the engine, for this, insert rails with holes into the holes -2 and 7-.
-- Engage the Engine Sling :2024B -C- onto the engine and onto the Shop Crane :VAS6100 -A-.
-- Secure the mounting hooks and pins to the rails with holes using spring connectors -B-.
Vehicles with 1.5L Gasoline Engine
-- Balance the center of gravity of the engine, for this, insert rails with holes into the holes -2 and 7-.
-- Engage the Engine Sling :2024B -C- onto the engine and onto the Shop Crane :VAS6100 -A-.
-- Secure the mounting hooks and pins to the rails with holes using spring connectors -B-.
Vehicles with 2.0L Gasoline Engines
-- Balance the center of gravity of the engine, for this, insert rails with holes into the holes -2 and 8-.
-- Engage the Engine Sling :2024B -C- onto the engine and onto the Shop Crane :VAS6100 -A-.
-- Secure the mounting hooks and pins to the rails with holes using spring connectors -B-.
Vehicles with 2.0L Diesel Engine
-- Insert the spindles of the Lifting Tackle :3033 -B- at the positions -3 and 9-.
-- Engage the lifting tackle -C- at the Shop Crane :VAS6100 -A-.
-- Secure the spindles -B- at the engine and align using the knurled nut.
Continuation for all vehicles
-- Lift the engine from the engine bracket using the workshop crane.
-- Remove the alignment sleeves.
-- Secure the engine with pins -arrows- to the Engine and Gearbox Bracket :VAS6095A -A-.