Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING, LHD: Removing

-- Turn off the ignition and all electrical equipment.

-- Store the vehicle key outside of the vehicle so that the ignition will not unintentionally start.

-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the A-pillar lower trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the footrest. Refer to FOOTREST, REMOVING AND INSTALLING .

-- Unclip the diagnostic connection from the bracket.

-- Disconnect the connectors -1, 2 and 3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To disconnect the connector, press the catch -1-.

Fig 1: Pressing Catch -1-, Turn Retaining Bracket In - Direction Of Arrow For Removal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pivot the retaining bracket -arrow- and remove the connector.

-- Release the springs -arrow-, pivot the vehicle electrical system control module -4- out of the bracket -5- and remove it downward.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.