Overview - Door Components

NOTE:

The left side is shown in the image.

Fig 1: Exploded View Of Front Door Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Front Door
- Removing and Installing. Refer to DOOR, REMOVING AND INSTALLING .
- Adjusting. Refer to DOOR, ADJUSTING .
Window Guide
- Removing and Installing. Refer to WINDOW GUIDE, REMOVING AND INSTALLING .
Outer Window Shaft Strip
- Removing and Installing. Refer to OUTER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
Sticker
- 19 mm diameter
- Use commercially available duct tape if needed
Insulation
- Self-adhesive
- Installing:
  -- Cut to size if necessary, 200 mm x 100 mm. Position as shown in the image.
  
  -- Warm up using the Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A and then press firmly onto the outer door panel.
Outer Door Seal
- Removing and Installing. Refer to OUTER DOOR SEAL, REMOVING AND INSTALLING .
Insulation
- Self-adhesive
- Installing:
  -- Cut to size if necessary, 250 mm x 160 mm. Position as shown in the image.
  
  -- Warm up using the Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A and then press firmly onto the outer door panel.
Sticker
- 32 mm diameter
- Use commercially available duct tape if needed
Inner Window Shaft Strip
- Removing and Installing. Refer to INNER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .