Selector Mechanism Function Test
WARNING: This page is about a different variant/trim than selected.
Test step 2.1
- Engine running, selector lever in "D" engaged and vehicle speed greater than 4 km/h.
-- Engage the "N" position.
"N" position is engaged.
-- Engage the "R" position. "R" position is not possible.
"N" position is engaged.
-- Then engage the "D" position without applying the brakes; vehicle speed is greater than 4 km/h.
It must be possible.
Test step 2.2
- Engine running, "D", "R" or "N" position is selected, vehicle speed = 0 km/h.
-- Select the drive position "P" :
"P" position must be displayed on the Selector Lever Transmission Range Display -Y5-.