Rear Axle Toe, Adjusting

Special tools and workshop equipment required

Torque Wrench, 40-200Nm:VAG1332A

Fig 1: Identifying Torque Wrench 1332
Courtesy of AUDI OF AMERICA, LLC

-- Loosen the nut -1-.

Fig 2: Identifying Nut And Eccentric Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Turn the eccentric screw -2- until the specified value is reached.

NOTE:

The maximum adjustment range is 90° to left or right of center position.

-- Tighten the nut -1-.

-- After the nut -A- is tightened, check the toe value again. Refer to AXLE ALIGNMENT SPECIFIED VALUES .

Tightening Specifications