Overview - Generator
- Generator
- Ribbed Belt Pulley, Removing and Installing. Refer to RIBBED BELT PULLEY, REMOVING AND INSTALLING .
- Voltage Regulator -C1-, Removing and Installing. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING .
- Check using the Vehicle Diagnostic Tester Refer to GENERATOR, CHECKING .
- Removing and Installing. Refer to GENERATOR, REMOVING AND INSTALLING .
- Bolts
- 23 Nm
- Quantity: 2
- Bushings
- Loosen the bushings
- Quantity: 2
- Connector
- Cap
- Nut
- 20 Nm
- 30/B+ Terminal
- Nut
- 3.2 Nm
- Wire Clamp
- Threaded Pin
- 3.2 Nm